TIMESERT ® USEFUL TOOLS

TAP GUIDES INSURE THAT THREADS ARE SQUARE TO SURFACE.

image001

The lower portion of the tap guide should remain as square as possible to the engine surface.
Turn the tap slowly while making sure the guide remains flush.

TAP GUIDES

METRIC SIZE PART NO.
M5x0.8 35086
M6x1.0 http://www.timesert.com/az/Aa2.jpg   36105
M7x1.0 37105
M8x1.25 http://www.timesert.com/az/Aa2.jpg   38125
M9x1.25 39125
M10x1.0 30105
M10x1.25 30125
M10x1.5 http://www.timesert.com/az/Aa2.jpg   30155
M11x1.25 31125
M11x1.5 31155
M12x1.25 32125
M12x1.5 http://www.timesert.com/az/Aa2.jpg   32155
M12x1.75 32175
M14x1.5 http://www.timesert.com/az/Aa2.jpg   34155
M14x2.0 34255
M16x1.5 36155
M16x2.0 36205
M18x1.5 38155
M20x1.5 30215
M22x1.5 32255
M24x1.5 32455
INCH SIZE PART NO.
1/4-20 31420
1/4-28 31420
5/16-18 35168
5/16-24 35168
3/8-16 33816
3/8-24 33824
7/16-14 37164
7/16-20 37162
1/2-13 31213
1/2-20 31225
5/8-18 25885
3/4-10 33415
3/4-16 33416

image002

For Use in Restricted Areas
Ideal for use in areas where a T handle won’t fit. Set of 8 sockets fits all number and fractional M.C.T.I. standard taps thru 1/2″. A lso fits 1/8″ NPT taps and metric taps thru 12mm manufactured to M.C.T.I. standards. Sockets contained on a vinyl holder.

Time-Sert taps 4mm to 12mm metric / 4-40 to 1/2 inch.
Sockets #1 thru #4 use 1/4 drive,
rest use 3/8 drive.

image003-1

Three Larger Sizes in a Convenient Set
The three largest tap sockets, are now packaged in a three piece set. Ideal for use where a T handle won’t fit, especially in restricted areas. For larger, fractional M.C.T.I. standard taps. #9 socket is 5/8″ (16mm), #10 is for 11/16″ (18mm) and #11 is for 3/4″. Sockets contained in a vinyl holder.

Time-Sert taps 13mm to 16mm metric / 5/8 to 3/4 inch.
use 1/2 drive socket.

image005-1

Enables You To See A round Corners
2 1/4″ diameter mirror swivels to any position. Length extends from 10″ to 14″. Has an insulated vinyl grip.

240

Straight Tap Wrench, Length 15 Inches, Hand Taps
Capacity 5/32 to 3/4 Inch, Taps M4 to M19
wrench number 6 P/N C67203
Time-Sert taps 1/4 – 9/16 Inch, M5 – M14 Metric

Straight Tap Wrench, Length 19 Inches, Hand Taps
Capacity 1/4 to 1-1/8 Inch, Taps M12 to M28
wrench number 7 P/N C67204

T- handle wrench, Length 3-5/8 Hand Taps
Capacity 7/32” to 1/2” Inch Taps M5 to M12
wrench number T12 P/N C67209
Time-Sert taps M5 – M11

Straight Tap Wrench, Length 40 Inches, Hand Taps
Capacity 3/4 to 1-5/8 Inch, Taps M19 to M40
wrench number 8 P/N C67205

ex6

 

 

 

Removes broken bolts 5/8 to 7/8.

If removing a Time-Sert insert, this tool will remove
inserts from 1/2 to 9/16 inch or 12mm to 14mm metric.

image009-1

 

 

 

 

 

Made from hardened tempered alloy steel. Use when a screw or bolt has broken off while still in the fastening hole. 5 pc set 3/32 to 5/8

If removing a Time-Sert insert, this set will remove inserts from 4-40 to 7/16 inch or 4mm to 11mm metric.

ex7

 

 

 

Removes broken bolts 7/8 to 1-1/8.

If removing a Time-Sert insert, this tool will remove inserts from 5/8 to 3/4 inch or 16mm to 20mm metric.

ex8

 

 

Removes broken bolts 1-1/8 to 1-3/8.

If removing a Time-Sert insert, this tool will remove our 3/4 pipe insert.